Lqem n wass 27 Ctember 2016 à 19:09 beddel SalemB (mmeslay \| attekki) 4 158 modifications Asebtar amaynut: -- Text used by Module:Convert for enwiki. -- This is a separate module to simplify translation for use on another wiki. -- See en:Template:Convert/Transwiki guide if copyin...		Azmez n lqem taneggarut d 21 Yennayer 2021 à 06:50 beddel ssefsex Sami At Ferḥat (mmeslay \| attekki) 17 759 modifications Aucun résumé des modifications
Ajerriḍ 19: ['c'] = { exponent = -2, name = 'centi', }, ['m'] = { exponent = -3, name = 'milli', }, ['μ'] = { exponent = -6, name = 'micro', ~~prefix~~ = ~~'µ'~~ }, -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC ['µ'] = { exponent = -6, name = 'micro', prefix = 'μ' }, -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5 ['u'] = { exponent = -6, name = 'micro', prefix = 'µμ' }, -- not an SI prefix, but allow for people typing this ['n'] = { exponent = -9, name = 'nano' , }, ['p'] = { exponent =-12, name = 'pico' , }, Ajerriḍ 49: } ~~-- One of the following categories is included in the text of each message.~~ ~~-- Using the same category for each is simplest.~~ local all_categories = { unit = "[[Category:Convert errors]]", option = "[[Category:Convert errors]]", warning = '[[Category:Convert invalid options]]', tracking = '[[Category:Convert tracking]]', } Ajerriḍ 65: -- Message format string: $1=title, $2=text, $3=category, $4=anchor. -- Each displayed message starts with "Convert:" so can easily locate by searching article. cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[Help:Convert messages#$4\|<span title="Convert: $1">convert: $2</span>]]</i>]</sup>$3<span class="error"></span>', cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[Help:Convert messages#$4\|<span title="Convert: $1">$2</span>]]</sup>$3<span class="error"></span>', cvt_format_preview = '<strong class="error">Error in convert: $1 [[Help:Convert messages#$4\|(help)]]</strong>$3', -- Each of following messages is a table: Ajerriḍ 82: cvt_no_num = { 'Needs the number to be converted' , 'needs a number' , 'option', 'needs_number' }, cvt_no_num2 = { 'Needs another number for a range' , 'needs another number', 'option', 'needs_another_number' }, cvt_bad_frac = { '~~frac~~ "$1" ~~must be~~needs an integer above 1' , 'invalid fraction' , 'option', 'invalid_fraction' }, cvt_bad_prec = { 'Precision "$1" must be an integer' , 'invalid precision' , 'option', 'invalid_precision' }, cvt_bad_sigfig = { '~~sigfig~~ "$1" ~~must be~~needs a positive integer' , 'invalid sigfig' , 'option', 'invalid_sigfig' }, cvt_empty_option = { 'Ignored empty option "$1"' , 'empty option' , 'option', 'empty_option' }, cvt_deprecated = { 'Option "$1" is deprecated' , '' , 'option', 'deprecated_option', format = 'cvt_format2', nowarn = true }, cvt_no_spell = { 'Spelling is not available' , 'bug, ask for help' , 'option', 'ask_for_help' }, cvt_unknown_option = { 'Ignored invalid option "$1"' , 'invalid option' , 'option', 'invalid_option' }, Ajerriḍ 142: ["by(x)"] = { input = " by ", output = " × ", out_range_x = true }, ["x"] = { off = " by ", on = " × ", abbr_range_x = true }, ~~["X"] = { off = " by ", on = " × " }, -- TEMPORARY and undocumented option for experiments to compare with new abbr_range_x~~ ["xx"] = " × ", ["&"] = "~~and~~×",▼ ~~[""] = "×", -- use "" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}}~~ ["/"] = " / ", -- for a table of high/low temperatures with {{convert\|83\|/\|63\|F\|disp=br()\|abbr=values}} } local range_aliases = { -- ["alternative name for a range"] = "standard range name" ▲ ["&"] = "and", ["–"] = "-", ["–"] = "-", ["to-"] = "to(-)",▼ ["×"] = "x", ["×"] = "x", Ligne 183 ⟶ 181 : ["lang"] = "lang", ["lk"] = "lk", ["near"] = "near",▼ ["order"] = "order", ["qid"] = "qid", ▲ ["~~to-~~qual"] = "~~to(-)~~qual", ▲ ["~~near~~qualifier"] = "~~near~~qual", ["round"] = "round", ["sigfig"] = "sigfig", Ligne 194 ⟶ 193 : ["stylein"] = "stylein", ["styleout"] = "styleout", ["tracking"] = "tracking", } Ajerriḍ 211: ["abbr"] = { -- ["local text for option value"] = "en value used in this module" ~~["comma"] = "opt_nocomma?", -- no numsep in input or output numbers~~ ["def"] = "", -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation") ["h"] = "on", -- abbr=on + use "h" for hand unit (default) ["hh"] = "opt_hand_hh", -- abbr=on + use "hh" for hand unit ["in"] = "in", -- use symbol for LHS unit ~~["mos"] = "mos", -- in a range, repeat the input unit (no longer used)~~ ["none"] = "off", -- old name for "off" ["off"] = "off", -- use name for all units ["on"] = "on", -- use symbol for all units ["out"] = "out", -- use symbol for RHS unit (default) ["unit"] = "unit", -- abbr=on but abbreviate units only: e6km → million km (not ×10⁶ km) ["values"] = "opt_values", -- show only input and output numbers, not units ["~"] = "opt_also_symbol", -- show input unit symbol as well as name }, ["adj"] = { ~~["1"] = "opt_singular", -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1)~~ ~~["flip"] = "opt_flip?", -- reverse order of input/output~~ ~~["j"] = "opt_use_nbsp", -- "join": use " " instead of " " between value and unit name~~ ["mid"] = "opt_adjectival, opt_adj_mid", -- adj=on with user-specified text after input unit (between input and output) ~~["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers~~ ["off"] = "", -- ignored (off is the default) ["on"] = "opt_adjectival", -- unit name is singular and hyphenated Ligne 242 ⟶ 237 : ["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits ["gaps3"] = "opt_gaps, opt_gaps3", -- group only in threes rather than default of no gap before a single digit after decimal mark ~~["gaps5"] = "opt_gaps?", -- deprecated 2015-05-29, was: opt_gaps + opt_comma5~~ ["off"] = "opt_nocomma", -- no numsep in input or output numbers }, Ligne 249 ⟶ 243 : }, ["disp"] = { ["/5"] = "oropt_round=5?", -- round output value to nearest ~~-- see "slash"~~5 ~~["2"] = "opt_output_only?", -- display only output value and symbol/name (not input)~~ ~~["5"] = "opt_round=5", -- round output value to nearest 5~~ ["b"] = "b", -- join: '(...)' ["(or)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination Ligne 258 ⟶ 250 : ["comma"] = "comma", -- join: ',' ["flip"] = "opt_flip", -- reverse order of input/output ~~["flip5"] = "opt_flip, opt_round=5?", -- disp=flip + disp=5~~ ~~["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers~~ ["number"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name) ["or"] = "or", -- join: 'or' Ligne 266 ⟶ 256 : ["output only"] = "opt_output_only", ["preunit"] = "opt_two_preunits", -- user-specified text before input and output units ~~["s"] = "or?", -- see "slash"~~ ~~["slash"] = "or?", -- 2014-11-03: "disp=slash" is now equivalent to "disp=or" as slash is unhelpful~~ ["sqbr"] = "sqbr", -- join: '[...]' ["table"] = "opt_table", -- output is suitable for a table cell with align="right" ["tablecen"] = "opt_tablecen", -- output is suitable for a table cell with align="center" ~~["u2"] = "opt_output_unit_only?", -- display output symbol/name (not input, and not output value)~~ ["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value) ["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known Ligne 288 ⟶ 275 : ["on"] = "on", -- link all unit names or symbols (but not twice for the same unit) ["out"] = "out", -- link RHS unit name or symbol }, ~~["near"] = {~~ ~~["5"] = "opt_round=5?", -- round output value to nearest 5~~ }, ["order"] = { ["flip"] = "opt_flip", -- reverse order of input/output ["out"] = "opt_order_out", -- do not show input; instead, use order in output combination, with the first output shown as the input }, -- qid=x is handled as a special case: x should be a Wikidata Q item identifier. -- qual=x is handled as a special case: x should be a Wikidata Q item identifier. ["round"] = { ["0.5"] = "opt_round=0.5", -- round output value to nearest 0.5 Ligne 307 ⟶ 293 : ["sortable"] = { ["off"] = "", -- ignored (off is the default) ~~["in"] = "opt_sortable_on?", -- same as "on"~~ ["on"] = "opt_sortable_on", -- output sort key for use in a sortable table, based on value from converting to a standard base unit ["~~out~~debug"] = "opt_sortable_on?, opt_sortable_debug", -- \|sortable=debug is the same as "\|sortable=on"\|debug=yes }, ["sp"] = { Ligne 322 ⟶ 307 : -- stylein=x is handled as a special case: x can be any text -- styleout=x is handled as a special case: x can be any text -- tracking=x is handled as a special case: x can be any text } Ligne 328 ⟶ 314 : all_categories = all_categories, all_messages = all_messages, currency = { ['$'] = true, ['£'] = true, ['€'] = true, ['₱'] = true, ['₽'] = true, ['¥'] = true }, customary_units = customary_units, disp_joins = disp_joins,

Module:Convert/text : Tameẓla gar ileqman